Guide: Installing Draw Bolts in your Butcherblock Top

Tools and Materials Needed:

  • Draw bolts (included with your butcherblock)
  • Wrench or socket wrench (appropriate size for the bolt head)
  • Damp cloth

1. Prepare the Joint

  • Align the Butcherblock Pieces: Lay the sections on a flat surface, ensuring the pre-drilled holes for the draw bolts align perfectly.
  • Clean the Edges: Wipe the joining edges with a damp cloth to remove dust or debris.

2. Insert the Draw Bolts

  • Position the Bolts: Insert the draw bolts through the pre-drilled channels on the underside of the countertop.
  • Hand-Tighten: Thread the bolts into their corresponding nuts by hand to ensure proper alignment without cross-threading.

3. Tighten the Bolts

  • Evenly Tighten: Using a wrench or socket wrench, gradually tighten each bolt. Alternate between bolts to apply even pressure and ensure a tight, level joint.
  • Do Not Over-Tighten: Tighten only until the joint is snug and secure, avoiding excessive force that could damage the wood.

4. Final Check

  • Inspect the Joint: Ensure the seam is flush and tight across the entire length.
  • Test for Stability: Gently apply pressure to confirm the pieces are securely joined.

Your butcherblock is now assembled and ready for installation!